Non-Skid Pads; Making Amplifier Settings - Pioneer S-ES21CR-K Operating Instructions Manual

SURROUND SPEAKERS
For best results the speakers should be positioned at or
above ear level. Depending upon your room layout and
preferences, the left and right rear speakers should be
positioned on the side walls just the rear of the listening
position, or on the walls.
STANDARD SURROUND SETUP
This is a standard multichannel surround sound speaker
setup for optimal 5.1 channel home theater sound.
Front
left
Surround left

NON-SKID PADS

If the center and surround speakers are placed on a hard
surface, such as wood or tile place four non-skid pads on
the bottom flat surface of the speakers.
Center speaker

MAKING AMPLIFIER SETTINGS

Before connecting the speakers, please read the
operating instructions supplied with your amplifier to
select the speaker setting of amplifier :
• CENTER / SURROUND SPEAKERS : SMALL
2
En
Center
Listening position
Surround right
Surround speakers
CONNECTING YOUR SYSTEM
Make sure all equipment is turned off before making any
connections.
• Correct wiring of your speakers is essential for
achieving the best sound quality. Be careful to
ensure proper polarity of connection.
CAUTION
These speaker terminals carry HAZARDOUS LIVE
voltage. To prevent the risk of electric shock when
Front
connecting or disconnecting the speaker cables,
right
disconnect the power cord before touching any
uninsulated parts.
Connect to the speaker terminals on the rear of
the amplifier.
Subwoofer
Connect the red marked speaker cord to the red (+)
(not supplied)
terminal and the other cord to the black (–) terminal as
shown below (for more details, refer to your amplifier
instruction manual).
Connect to the speaker terminals on the rear of
the speakers.
To connect, press the lever and insert the red marked
speaker cord into the red (+) terminal and the other
cord into the black (–) terminal as shown below.
After connecting the plugs, pull lightly on the cords to
make sure that the ends of the cords are securely
connected to the terminals. Poor connections can create
noise and interruptions in the sound.
Amplifier
Black
Red
Other half of
speaker cord
D3-4-2-2-3_A1_En
Speakers
Red marked half of
speaker cord