Table of Contents
Advertisement
Available languages
Available languages
REPLACING THE LAMP
The appliance is equipped with a long-
life LED interior light.
It is strongly recommended to use
original spare parts only.
Use LED bulbs (E14 base) only. The
maximum power is shown on the lamp
unit.
CAUTION! Disconnect the plug from
the mains socket.
1. Pull the left side of the lamp cover with your
fingers to unlock it. Remove the cover by
pulling it towards yourself.
INSTALLATION
WARNING! Refer to Safety chapters.
POSITIONING
This appliance can be installed in a dry, well
ventilated indoor where the ambient temperature
corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
Ambient temperature
class
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
ELECTRICAL CONNECTION
•
Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
TECHNICAL DATA
Height
Width
16
2. Replace the bulb with one of the same power
3. Install the lamp cover.
4. Connect the plug to the mains socket.
5. Open the door.
•
•
•
INSTALLATION OF THE APPLIANCE AND
DOOR REVERSAL
1745 mm
595 mm
and shape, specifically designed for household
appliances.
Make sure that the light switches on.
The appliance must be earthed. The power
supply cable plug is provided with a contact for
this purpose. If the domestic power supply
socket is not earthed, connect the appliance to
a separate earth in compliance with current
regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C.
Directives.
Please refer to separate instructions
on installation (ventilation
requirements, levelling) and door
reversal.
Depth
Rising time
1
2
1
647 mm
30 h
Advertisement
Table of Contents
