Product Instructions And Product Improvement; Unlocking; Temperature Setting; Precautions - Haier DW-86L338J Service Manual

High temperature
compressor
High temperature
filter
condenser
Low temperature
filter
V. Product instructions and product improvement

5.1 Unlocking:

First press the "Up" or "Down" button, the display screen shows "00", press " " to adjust to "06" ("06" is the
password), and then press and hold the "Function Selection" button for 3 seconds, the lock indicator light is off,
and it is unlocked.

5.2 Temperature setting:

In the unlocking state, press the "Function Selection" button to select "Freezer Temperature Setting", "High
Temperature Alarm Setting" and "Low Temperature Alarm Setting" respectively, after the corresponding
indicator lights are on, press the "Up" or "Down" button to adjust the required temperature.
**Setting method of model DW-86L100J:
After unlocking, when the freezer temperature display area displays TS, press the "Set" button to enter, the
current temperature setting value of freezer is flashing displayed, press the "Up" or "Down" button to modify the
temperature setting value of freezer;

5.3 Precautions

5.3.1 After initial installation or moving of the equipment, please rotate the horizontal support legs clockwise to
support the ground to ensure that the freezer does not move when it is in use. After installation and fixation, it needs
to stand for 24 hours before being powered on.
5.3.2 During use, the room temperature should be kept below 28ºC (if the ambient temperature is higher than 32ºC,
the cooling efficiency will decrease rapidly, and if the ambient temperature is higher than 32 for a long time, the
compressor may be damaged or its service life will be reduced. Therefore, it is recommended to install air
ULT Energy-saving Series After-sales Service Manual
High temperature gas-liquid
separator
Condenser fan
Cryogenic
compressor
Oil separator
20