Fitting Gas Inlet Casing, Nozzle Ring And Insulation (A175-L And Smaller); Table 31 Tightening Torque - ABB HT565485 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly
8.10 Fitting gas inlet casing, nozzle ring and insulation
(A175-L and smaller)
Fitting the nozzle ring
Coat the screw threads with high-temperature grease.

Figure 44: Fitting the nozzle ring (A175-L and smaller)
Part number
56014
Table 31: Tightening torque (56014)
1. Align the notch (A
the gas inlet casing (51001).
2. Fit screws (56014) with high-temperature grease and with washers (56011).
© Copyright 2016 ABB. All rights reserved.
A165-L
M10
35 Nm
) with the flange connection (A
1
A170-L
M10
35 Nm
) and slide the nozzle ring (56001) into
2
HZTL4034_EN
Page 77 / 111
A175-L
M10
35 Nm
Revision G
October 2016