Motorola AltiVec MVME5100 Series Installation & Use Manual page 100

Solving Startup Problems
B
Condition
V. The debugger is in
system mode; the
board autoboots,
or the board has
passed self tests.
VI. The board has
failed one or more
of the tests listed
above; cannot be
corrected using
the steps given.
B-4
Table B-1. Troubleshooting Problems (Continued)
Possible Problem
A. No apparent
problems —
troubleshooting is
done.
A. There may be
some fault in the
board hardware or
the on-board
debugging and
diagnostic
firmware.
TROUBLESHOOTING PROCEDURE COMPLETE
Possible Resolution:
No further troubleshooting steps are required.
1. Document the problem and return the board for service.
2. Phone 1-800-222-5640.
Computer Group Literature Center Web Site