2.4
List of Jumpers
The board features a number of jumpers which can be configured for your application.
Please refer to the table below and following sections for all jumpers which can be
configured.
Label
JP1
JP2 (1-2-3)
JP2 (3-4-5)
JP3
JP5
JP6
2.4.1
Clear CMOS Jumper (JP6)
Normal (Default)
2.4.2
LVDS/eDP Port Backlight Inverter VCC Selection (JP2)
+12V
Chapter 2 – Hardware Information
Function
LVDS/eDP Backlight Lightness Control Mode Selection
LVDS/eDP Backlight Inverter VCC Selection
LVDS/eDP Operating VDD Selection
Touch Screen 4/5/8-wire Mode Selection
Auto Power Button Enable/Disable Selection
Clear CMOS Jumper
Clear CMOS
+5V (Default)
11