Introduction; Additional Products Required; Additional Tools; Establishing The Connection - Bosch MIC IP fusion 9000i Installation Manual

Hide thumbs Also See for MIC IP fusion 9000i:
Table of Contents

Advertisement

MIC IP fusion 9000i
2

Introduction

Caution!
Take extra care lifting or moving MIC cameras because of their weight.
!
The MIC packaging is designed:
2.1

Additional Products Required

* Refer to the chapter Preparing Wiring in the installation manual.
2.2

Additional Tools

1 Phillips-head screwdriver to secure the ground lug of the camera
1 Adjustable wrench or socket set to secure the base of the camera to mounting accessories
2.3

Establishing the connection

The unit must have a valid IP address and a compatible subnet mask to operate on your
network. By default, DHCP is pre-set at the factory to On and so your DHCP server assigns an
IP address. With no DHCP server the default address is 192.168.0.1
The Project Assistant app or Configuration Manager (version 7.50 or higher) can be used to
find the IP address. Download the software from https://downloadstore.boschsecurity.com:
1.
2.
3.
Bosch Security Systems
This equipment should be unpacked and handled with care. Check the exterior of the
packaging for visible damage. If an item appears to have been damaged in shipment,
notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are
missing, notify your Sales or Customer Service Representative from Bosch Security
Systems.
Do not use this product if any component appears to be damaged. Please contact Bosch
Security Systems in the event of damaged goods.
The original packing carton (if undamaged) is the safest container in which to transport
the unit and must be used if returning the unit for service. Save it for possible future use.
to allow installers to configure the camera inside the shipping box.
to provide a temporary table-top or desk-top stand.
Quantity
Component
100 m
Ethernet cable (Cat5e or better)
maximum
*
Power cable (24 VAC)
*
Alarm wiring as needed
*
Audio wiring as needed
1
Full SD card. Recommended: industrial SD cards from Western Digital
(sold separately by Bosch)
Start the web browser.
Enter the IP address of the device as the URL.
During the initial installation, confirm any security questions that show.
Installation Manual
Introduction | en
2022-09 | 1.6 | F.01U.334.820
11

Advertisement

Table of Contents
loading

Table of Contents