Table of Contents
Advertisement
3.4 Switching Power ON
Next, switch the power ON following the sequence described below. Follow the reverse sequence when switching
the power OFF.
(1)
Switch ON the host machine.
(2)
Switch ON the target system.
(3)
Set the SW1 of the IE-77016-CM-LC to ON
Note This switch does not control the power of the IE-77016-CM-LC.
Caution If removing or replacing devices on the target system, be sure to set SW1 of the IE-77016-CM-LC
to OFF when you switch OFF the power of the target system.
3.5ý Starting Up ID77016
Start up the ID77016 on the host machine. For details, refer to the ID77016 User's Manual.
CHAPTER 3 INSTALLATION
Note
(JTAG signal is output).
User's Manual Guide U14139EJ1V0UM00
15
Advertisement
Table of Contents
