G1 G2; G3 Te3; G4 Te4 - Cisco Catalyst 3650 Series Manual

Chapter 1 Product Overview
Figure 1-6
1
2
Table 1-8
Color
Off
Green
Blinking green
Blinking amber
Amber
Rear Panel
The switch rear panel includes StackWise connectors, ports, fan modules, and power supply modules.
See
OL-29734-01
Uplink Ports LEDs
G1 LED
G2 LED
Uplink Ports LEDs
Uplink Ports Link Status
Link is off.
Link is on, no activity.
Activity on a link, no faults.
Link is off due to a fault or because it has exceeded a limit set in the
switch software.
Caution
Link for the SFP or SFP+ has been disabled.
Figure 1-7.
Ca ta ly st 36 50 48
Po E+ 2X 10 G
G1
G2
G3
TE 3
G4
1
2
3
4
3 G3, TE3 LED
4
G4, TE4 LED
Link faults occur when noncompliant cabling is connected
to an SFP or SFP+ port. Use only standard-compliant
cabling to connect to Cisco SFP and SFP+ ports. You must
remove from the ports any cable or device that causes a
link fault.
Catalyst 3650 Switch Hardware Installation Guide
TE 4
Rear Panel
1-15