Summary of Contents for Asus AAEON UP 4000 M.2 Plus
Page 1
UP 4000 M.2 Plus Carrier Board UP-APL03CB User’s Manual 1st Ed Last Updated: September 30, 2022...
Page 2
Copyright Notice This document is copyrighted, 2022. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
Page 3
Acknowledgement All other products’ name or trademarks are properties of their respective owners. Preface...
Page 4
Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity UP-APL03CB (UP 4000 M.2 Plus Carrier Board) ⚫ FPC Cable ⚫ Screws (pack) ⚫ If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
Page 5
About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page at AAEON.com for the latest version of this document.
Page 6
Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. Make sure the power source matches the power rating of the device. Position the power cord so that people cannot step on it.
Page 7
If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii. Exposure to moisture Device is not working as expected or in a manner as described in this manual The device is dropped or damaged Any obvious signs of damage displayed on the device...
Page 8
FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Page 10
China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Main Board/ Daughter Board/ Backplane Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) PCB &...
2.4.3 M.2 E-Key (CN5) Signal Description Signal Description +3.3V +3.3V PCIE_TXP PCIE_ TXN PCIE_RXP Chapter 2 – Hardware Information...
Page 22
Signal Description Signal Description PCIE_ RXN PCIE_Clock_P PCIE_Clock_N Suspend clock WIFI_RST# Bluetooth enable (internal pull M.2 Clock request high to 3.3V) Wi-Fi enable (internal pull high PCIe Wake to 3.3V) +3.3V +3.3V Chapter 2 – Hardware Information...
UP 4000 M.2 Plus Module Installation For this process you will need a Phillips head screwdriver. Step 1: First, make sure to unlock the UP 4000’s FPC connector, then plug the FPC cable into the FPC connector, noting the direction of the FPC cable. Chapter 3 –...
Page 31
Step 2: Remove the four screws and lock the four pillars. Chapter 3 – Module Installation...
Page 32
Step 3: Reaffix the four screws with the UP 4000 M.2 Plus. Chapter 3 – Module Installation...
Page 33
Step 4: Unlock the FPC connector, the plug the FPC cable into it. Chapter 3 – Module Installation...
Page 34
Step 5: Assemble the 2230/3042/3052/2280 card as needed. Chapter 3 – Module Installation...