Sw Assign; Direction - Sony RM-IP500 Operating Instructions Manual

Settings (Bold: Description
default value)
SHT Automatically adjusts the
exposure using the electronic
shutter speed. Adjust the ND
filter, iris, and gain manually.
CAM POWER
Settings (Bold: Description
default value)
EACH Only the target camera turns on/
off when using the CAM POWER
button.
ALL All cameras registered in the
camera table turn on/off when
using the CAM POWER button.
Note
SRG-300SE, SRG-301SE, and SRG-201SE do not
switch to standby mode.
ZOOM
Settings (Bold: Description
default value)
LEVER Controls the zoom of the target
camera using the ZOOM lever on
the lens control block.
JOYSTICK Controls the zoom of the target
camera using the ZOOM ring on
the joystick.
BOTH Controls the zoom of the target
camera using both the ZOOM
lever and the ZOOM ring on the
joystick.
CAMERA FREQ
Settings (Bold: Description
default value)
59.94, 50, 23.98 Selects the frame rate for the
shutter speed displayed in the
menu. You can select from 59.94
[Hz], 50 [Hz], and 23.98 [Hz].
* The shutter speed is displayed in the status display
(page 62).
LCD BRIGHT
Adjusts the brightness of the LCD panel in five
increments, 1 (dark) to 5 (bright).
LAMP DIMMER
Adjusts the brightness of the LED buttons in five
increments, 1 (dark) to 5 (bright).

SW ASSIGN

ASSIGN 1 to ASSIGN 6
Assign functions to the ASSIGN 1 to ASSIGN 6
buttons of the unit.
IRIS KNOB
If the target camera is equipped with a variable
ND filter, you can assign a function to the IRIS
knob.
For details about function assignments to assign
buttons, see "Assigning Functions to Assign
Buttons" (page 51).

DIRECTION

Sets the control direction of the joystick, ZOOM
lever, and FOCUS knob.
JOYSTICK PAN
Settings (Bold:
default value)
STANDARD
REVERSE
JOYSTICK TILT
Settings (Bold:
default value)
STANDARD
REVERSE
*
ZOOM LEVER
Settings (Bold:
default value)
STANDARD
REVERSE
74
Description
Inclining the joystick to the right
pans the camera to the right.
Inclining to the left pans the
camera to the left.
Inclining the joystick to the right
pans the camera to the left.
Inclining to the left pans the
camera to the right.
Description
Inclining the joystick forward tilts
the camera up. Inclining rearward
tilts the camera down.
Inclining the joystick forward tilts
the camera down. Inclining
rearward tilts the camera up.
Description
Moving the ZOOM lever to the W
side (Wide) zooms out, and
moving to the T side (Tele) zooms
in.
Moving the ZOOM lever to the W
side (Wide) zooms in, and moving
to the T side (Tele) zooms out.