Clock; Signal Strength Indicator - Kenwood TK-7185E Instruction Manual

C
LOCK
If activated by your dealer, your transceiver can track the time and date with its
built-in clock. To view the clock any time, press the key programmed as Clock.
If programmed by your dealer, the time will display momentarily when the
transceiver power is turned ON.
Note: Removing the transceiver power for extended periods will cause the clock time to clear.
■ C
S
LOCK ETUP
To set the year, month, day, and time:
1 With the transceiver power OFF, press and hold the C> key while turning
the transceiver power ON.
• The current year setting appears.
2 Press the
the month setting.
• Repeat this step, to cycle through the day, hour, and minute settings.
3 Press the S key again, to return to the year setting.
• A triple beep will sound, indicating that your selections have been set into the
transceiver memory.
4 Turn the transceiver power OFF and then back ON to return to normal
operation.
S S
IGNAL TRENGTH
The signal strength indicator displays the strength of received calls:
Strong signal
Medium signal
Weak signal
Very weak signal
22
and keys to select the year, then press the S key to cycle to
I
NDICATOR