1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Wireless Access Point
  5. Meraki Go GR62
  6. Installation manual

Cisco Meraki Go GR62 Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Meraki Go GR62 Installation Guide
The Cisco Meraki GR62 is a dual-band enterprise class 802.11ax cloud-managed access point.
Package Contents
The GR62 package contains the following:
• GR62 Cloud-Managed Access Point
•
Mount plate
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco Meraki Go GR62

Summary of Contents for Cisco Meraki Go GR62

  • Page 1 Meraki Go GR62 Installation Guide The Cisco Meraki GR62 is a dual-band enterprise class 802.11ax cloud-managed access point. Package Contents The GR62 package contains the following: • GR62 Cloud-Managed Access Point • Mount plate...
  • Page 2 • Mount Kit ◦ Wall screws, wall screw anchors, and security screws Understanding the GR62 Your Meraki GR62 has the following features:...

  • Page 4: Security Features

    Security Features The GR62 features multiple options for physically securing the access point after installation: 1. Security screw – The accessory kit includes screws that can be used to secure the access point to the mount cradle. Engaging the security screw prevents accidental dislodging and theft. Ethernet Ports The GR62 features a Gigabit Ethernet RJ45 port that accepts 802.3at and 802.3af power (labeled “Eth0, PoE”).

  • Page 5: Check And Upgrade Firmware

    Check and Upgrade Firmware To ensure your GR62 performs optimally immediately following installation, it is recommended that you facilitate a firmware upgrade prior to mounting your GR62. 1. Attach your GR62 to power and a wired Internet connection. See the "Power the GR62" section for details. 2.

  • Page 6: Collect Tools

    for the DHCP server to configure DHCP reservations. Collect Tools You will need the following tools to perform an installation: Collect Additional Hardware for Installation You will need the following hardware to perform an installation: Installation Instructions...

  • Page 7: Choose Your Mounting Location

    2. Power over Ethernet supports a maximum cable length of 300 ft (100 m). 3. If being used in a mesh deployment, the GR62 should have line of sight to at least two other Meraki devices. A Cisco Partner can help ensure that your AP placement is ideal. Mount the GR62 Attach the GR62 to the Mount Cradle The GR62 attaches to the mount cradle with two tabs on the cradle that insert into the GR62, and is secured to the cradle using one screw.
  • Page 14 To release the GR62 from the mount cradle, first remove the security screw that secures the GR62 to the cradle’s bottom tab. While holding the GR62 with one hand, press the cradle’s bottom tab upwards, releasing the GR62 from the bottom of the cradle. Then remove the GR62 from the cradle’s top tab. Desk or Shelf Mount The GR62 can be placed on a desk or shelf resting on the non-scratch rubber feet.

  • Page 15: Verify Device Functionality And Test Network Coverage

    was not used, the GR62 can still be secured using a Kensington lock. Power the GR62 If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the mount cradle. If mounting to a wall or ceiling, the Ethernet cable will feed from behind the GR62.
  • Page 16 FCC Caution
 
 Any changes or modifications no expressly approved by Meraki could void the user’s authority to operate this equipment. This Transmitter must not be co- located or operation in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement
 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
  • Page 17 電磁波曝露量MPE標準值1mW/cm ，本產品使用時建議應距離人體 20 cm。 1. 使用此產品時應避免影響附近雷達系統之操作。 2. 高增益指向性天線只得應用於固定式點對點系統。...

Table of Contents