Table of Contents
Advertisement
Fitting diffuser
CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Disassembling and assembling
turbocharger
Fasten diffuser (79000) and O-ring (42012) using screw (42008).
Check lifting gear and fasten to bearing casing (42001).
Unscrew the cartridge group and lift it out of the service support
(90012).
Apply high-temperature grease to the centering points and screw
threads.
Remove temporary covers from oil connections.
Don't damage or shift gasket rings (A) in the mounting support when
fitting the cartridge group. The gasket rings (A) are supplied by the en-
gine builder.
Operation Manual / TPS48-D/E.. - TPS61-D/E..
8
8.3
Page 107
Advertisement
Table of Contents
