Table of Contents
Advertisement
Mounting
Installation for DIN Rail
The DIS-3650AP can be mounted on a standard DIN rail using the included
DIN mounting kit.
Use the following instructions to install the DIS-3650AP on a rail:
1. Install a Din rail kit on enclosure. Check that the DIN rail kit is installed
properly using two screws on each end.
2. Position the DIS-3650AP against the rail, then tilt it upwards and hook
the DIN rail clip on the back of the device against the rail. Snap the
device into place to complete the installation.
14
Advertisement
Table of Contents
