Mounting The Monitor - HP LP2275w User Manual

3. 3.
Mounting the Monitor Mounting the Monitor
The HP Quick Release can be removed from the pedestal base and installed to a mounting fixture. It The HP Quick Release can be removed from the pedestal base and installed to a mounting fixture. It
allows you to quickly and securely attach the monitor panel to the mounting fixture. allows you to quickly and securely attach the monitor panel to the mounting fixture.
1. 1.
Pull up on the monitor display head (2) to remove it from the base. Pull up on the monitor display head (2) to remove it from the base.
Figure Figure 3-12 3-12 Removing the Monitor Removing the Monitor from the
Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base Remove the monitor panel from the pedestal base. Refer to
on page on page 16 16 in the previous section. in the previous section.
CAUTION: CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach This monitor supports the VESA industry st
a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are
required (not provided with the monitor). Longer screws should not be used because they may required (not provided with the monitor). Longer screws should not be used because they may
damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant damage the monitor. It is important to verify that the manufacturer's mounting solution is compliant
with the VESA standard and is rated to support the weight of the monitor display panel. For best with the VESA standard and is rated to support the weight of the monitor display panel. For best
performance, it is important to use the power and video cables provided with the monitor. performance, it is important to use the power and video cables provided with the monitor.
from the Pedestal Base Pedestal Base
Removing the Monitor Pedestal Base
andard 100 mm mounting holes. To attach
Remo Re movi ving t ng the M he Mon onit itor P or Ped edes esta tal Ba l Base se 17 17