H&R FlowOx How-To Manual

1. Setting up the boot
a
Place the positioner grooves onto the
pressure chamber ridges. Move forwards
or backwards as required.
2. Treatment – regular use
a
Connect the hose from the pressure chamber to
the control unit. Connect the control unit to the
power supply.
FlowOx™ How to guide
b
Insert padding and place air vents into holes.
Attach the fastening band to the studs.
b
Place the seal onto the
stud and around the
top of the pressure
chamber.
c
Place the seal onto the stud
and around the top of the
pressure chamber.
c
d
Place foot on top of the Pull the seal onto
positioner centrally in the leg to make the
the pressure chamber. pressure chamber air
tight.
d
Attach the strap around the
bottom of the seal and at the
front. Fasten onto the stud.
e
Start treatment by
pressing the 'On/Off'
button.