Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
:
Networking
Product Category
Marketing Name / Model
[List multiple models if applicable.]
HPE Aruba AP-63x Series Campus Access Point
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by
Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment
(WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
MF877-00
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
MF877-01
Quantity
of items
included
in product
1
0
0
0
0
0
0
0
0
0
Page 1
Advertisement
Related Manuals for HP Aruba AP-63 Series
Summary of Contents for HP Aruba AP-63 Series
- Page 1 Product End-of-Life Disassembly Instructions Networking Product Category Marketing Name / Model [List multiple models if applicable.] HPE Aruba AP-63x Series Campus Access Point Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment (WEEE).
- Page 2 Quantity of items Item Description Notes included in product Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances...
- Page 3 1.Remove the two screws on the bracket at the position shown in the figure with the torque force equipment(Type:DEC). 2.Put the unit onto the fixture,and remove the four screws from the die cast with torque force equipment(Type:TT10). 3.Remove the top cover. 4.Use electrostatic tweezers to remove the antenna cable from the PCBA board.
- Page 4 6.Remove the three screws from PCBA board with torque force equipment(Type:PH1). 7.Remove the PCBA board from the die cast. MF877-00 Page 4 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...