Page 1
4-rack-system – wheel position low/high Version: 2021.V.2 After technical testing according to DIN 79008, ABES Bicycle-Stand 480 with one-sided bike support is recommended by the ADFC (Allge- meiner Deutscher Fahrrad-Club e.V.). BES S.À R.L. 48, RUE GABRIEL LIPPMANN L-6947 NIEDERANVEN...
User Manual - ABES Bicycle-Stand 480 Installation and maintenance instructions Manufacturer data ABES S.à r.l. VAT ID: LU 16222668 Aut. d’Etablissement: 75207 48, rue Gabriel Lippmann L-6947 Niederanven R. C. S. Luxembourg: B 48944 CEO: Rotger Barich Contact: Tel. +352 28 67 65 01...
User Manual - ABES Bicycle-Stand 480 Installation and maintenance instructions Main rack Round tube (Ø 42,4 x 2 mm), stainless steel 1.4301, polished (grain 240), noncor- rosive. Tolerance according to ISO 1127 D2/T3. ID No 50166608710002, Heat Number 01/459673. Wheel rack Round tube (Ø...
User Manual - ABES Bicycle-Stand 480 Installation and maintenance instructions Assembly The bicycle stand is designed to be set up on a flat concrete surface (C25/30), or any other underground with an equivalent bearing capacity, with a level value of +/- 0 mm.
User Manual - ABES Bicycle-Stand 480 Installation and maintenance instructions Notes Weather protection The bicycle stand is designed for outdoor use. No particular protection measures are re- quired. Concerning the perceptibility of a vacant bicycle rack system Visually impaired or blind persons can identify the bicycle stand system by touching it with a cane.
User Manual - ABES Bicycle-Stand 480 Installation and maintenance instructions Maintenance, repairs and disposal In summer and in winter, every screw joint has to be checked and, if need be, tightened to ensure the stable connection between all the components.
Hexagon nut DIN EN ISO 4032 - M8 Assembly and mounting Use the round head screws (5) and the hexagon nuts (6) to connect the Bicycle-Stands 480 (2) to both trapezoidal rails (1). Adjust the construction (see Planning sketch) and fix the rails (1) with the heavy duty anchor (4) to the floor (3).
(e.g.: C25/30) Zusammenbau und Montage Use the round head screws (2) and the hexagon nuts (1) to connect the Bicycle-Stands 480 (4+5) to both trapezoidal rails (6). Adjust the construction (see Planning sketch) and fix the rails (6) with the heavy duty anchor (3) to the floor (7).