Package Contents; Connecting The Power Cord; Charging The Device - Acer SpatialLabs View Pro User Manual

Package contents

LCD Display Quick Start
Device Guide
Adjusting the display base
1. Carefully remove the display from its packaging.
• The display base is attached onto the display before shipment and it is not
detachable.
2. Pull the display base out fully so that the display can be placed on a stable
surface in the upright position.

Connecting the power cord

• Check first to make sure that the power cord you use is the correct type
required for your area.
• The display has a universal power supply that allows operation in either
100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required.
• Plug one end of the power cord to the AC inlet, and plug the other end into an
AC outlet.
• For units using: Use a UL-listed cord set, type SVT wire and plug rated 7A/125 V.

Charging the device

• Only use the power adaptor for the battery charging.
• Your device uses the following power suppliers:
Manufacturer: Delta Electronics inc.

Model no: ADP-14EF F

•
•
The product is not allowed for power to be delivered via USB-C cables.
Adaptor USB A to
USB-C Cable
HDMI Cable