Saving The Settings (User Setting Registration) - JVC AV-P960E Instructions Manual

Saving the Settings (User Setting Registration)

The recalled settings upon power up or when the [USER] button is pressed can be registered.
Registration
Button Indicator
Lamp
USER
DEFAULT
WHITE BALANCE
RED
AUTO
PICTURE MEMORY
CAMERA 1
NEGA POSI BW COLOUR
Recalling the settings
Undo the settings
(Restoring the factory settings)
1.
2.
SETUP
USER SAVE
BLUE
2 3
TEXT MICROSCOPE
1.
1.
2.
Adjusting the camera
● Adjust the camera to the settings to be registered.
● The following user settings are possible. ( ) are factory settings.
• Zoom position (Approximately A4 portrait position)
• Lighting status (Both side illuminations light up)
• White Balance (Value corresponding to side illumination)
• Nega/Posi (Posi)
• Black & White/Colour (Colour)
• Text (OFF)
Press the [SAVE] button for more than
2 seconds
● The button indicator lamp will light up initially before blinking. It
will go off once the writing process has been completed.
● The written settings will be retained even if the power is turned
off.
Press the [USER] button
● The registered settings will be activated.
Press the [DEFAULT] button
● The factory settings will be restored.
Press the [SAVE] button for more than
2 seconds
● The button indicator lamp will light up initially before blinking. It
will go off once the writing process has been completed.
E-19