Adjusting The Interior Fittings; Adjusting The Door Shelf/Bottle Shelf; Moving The Shelves; Adjusting The Bottle Holder - Miele K 31222 Ui Operating And Installation Instructions

Adjusting the door shelf/bottle
shelf
Tip: Only move door shelves/bottle
shelves in the appliance door when they
are empty.
 Push the door shelf/bottle shelf
upwards, then remove it by pulling it
forwards.
 Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.

Moving the shelves

The shelves can be adjusted according
to the height of the food.
 Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge on the protective strip
at the back must face upwards to
prevent food from touching the back of
the appliance and freezing to it.
Stoppers prevent the shelves from
being dislodged by mistake.

Adjusting the interior fittings

Adjusting the bottle holder

The bottle holder can be moved left or
right to create more room for drink
cartons.
The bottle holder can be removed
completely (e.g. for cleaning):
 Push the bottle shelf upwards, then
remove it by pulling it forwards
 Pull the bottle holder upwards to
remove it from the rear edge of the
bottle shelf.
29