Advertisement
Resuming playback
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position
next time you press PLAY.
To memorize the interrupted position
1
Set the RESUME setting on the SYSTEM page of the preference display to ON.
(See page 39 for details about how to set.)
2
At the position you want to interrupt playback, press STOP, or press DVD POWER - TV POWER on the
remote control or POWER on the front panel.
The unit memorizes the interrupted position, while [RESUME] lights in the display window.
If you interrupt playback by pressing STOP in step 2 above and then turn off the power, the memory is not cleared.
To resume playback
7
While the disc you interrupt playback last time is still in the disc tray.
Press PLAY.
The unit starts playback from the position where you interrupted playback last time.
¶ To clear the resume position memory
Carry out one of the following:
* Take out the disc from the tray.
* Press a DISC (1 - 3) button.
* Press STOP while stopped.
* Turn on the unit by pressing DVD POWER - TV POWER (on the remote control) or POWER (on the front
panel).
NOTES
• If you want to resume playback, do not press a DISC (1 - 3) button to start playback or do not press the POWER (on the front
panel) or DVD POWER - TV POWER (on the remote control) to turn on the unit.
• The resume function does not work with Audio CD discs.
• The resume function does not work if RESUME on the SYSTEM page of the preference display is set to OFF.
• In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume
point you stored.
• The resume function does not work in the program or random mode.
Basic operations
English
Français
20
Advertisement
