Abestorm Water Damage Series User Manual
Hide thumbs
Also See for Water Damage Series:
- User manual (10 pages) ,
- User manual (6 pages) ,
- User manual (10 pages)
Related Manuals for Abestorm Water Damage Series
Summary of Contents for Abestorm Water Damage Series
- Page 1 Water Damage Series Fire Waving 200 Heater User’s Manual Abestorm Solutions INC Add:Berlin Tel: +44 (20) 81243974 Email: www.abestorm.com Note: as we keep upgrading our product,we reserve the right to modify the product without natice in advance.
- Page 2 You should only connect the unit to GFCI sources that are properly grounded Watch out for any foreign objects finding their way into the unit through openings and Abestorm Warranty Steps: ventilation. These could trigger a malfunction and consequent fire. They could also cause your heater to be damaged.
- Page 3 Process air 395 CFM 3 Ducting Reactivation air 65 CFM You can duct the Abestorm Firewaving 200 right at the inlet or both the inlet Water removal capacity 118 pints per day | 55.8 L per/day and outlet The unit is designed to accommodate an 8’’ duct that is also flexible (at 80°F/60%RH)
- Page 4 LCD Display Instructions 000 LIFE HRS: Refers to the total working time, i.e. the total working time (hours), which is in hours.(press the mode key + select the confirmation key, and the total working time will be cleaned after 3 seconds. IN/OUT 00℉...
- Page 5 "Humidistat Setpoint 00%":Used for setting dehumidification mode humidity.Press ">" to set the humidity. The adjustment Wifi hotspot: factory setting is "0FF", range of humidity setting is between 25 and 80%. press > to enable wifi hotspot and switch Each key rises or falls 5%, which can be recycled. ON/OFF.The device can transmit data and receive When the setting is completed,do not operate for 5 seconds APP commands.The icon flickers when connected...
- Page 6 3.1 Air Filter 6. Water Pump working interface display Compressor protection time not shown: Make a point of regularly checking the pleated fabric air filter fitted into the FireWaving 200. The filter is a standardized MERV-11 filter, of high efficiency. Operating the unit with an obstructed or dirty filter could lead to damage and accidents.
- Page 7 4.2 Troubleshooting 5 Accessories and Options 4033895 Duct Kit, Compact Heater, 8” inlet (no flex Duct) The FireWaving 200 makes use of a nichrome heating element that is wound to offer you several heat settings. The later feature depends on the requirements of the 4030733 Filter Package, 12 PK;...
- Page 8 6. Wiring Diagram Service Parts...
- Page 9 Warranty VERBAL WARRANTY CLAIMS. FireWaving 200 SHALL NOT BE HELD RESPONSIBLE FOR ANY REPAIR, USER, REPLACEMENT OR INSTALLATION OF warrantor: A PART UNDER ANY INDIRECT OR SPECIAL CONSERQUENTIAL DAMAGES Berlin INCLUDING WITH NO LIMITATION TO DAMAGE AS A RESULT OF WATER. THE Tel: +44(20)81243974 END USER IS EXPECTED TO TAKE CARE OF THE ITEM AND PREVENT SCOPE OF COVERAGE...