Connecting Interface Cables To The Gr4000 - Hitachi GR4000 Series Installation Manual

GR4000 Installation Guide Version 1.00 - Preliminary
Step 1
CONSOLE port of the GR4000, and then screw up the cable firmly to fix its position.
D-sub 9 pin connector
Figure 4.9-2 RS-232C cross cable being connected
Step 2 Connect the RS-232C cross cable to a setup terminal in the same manner as above.
4.10

Connecting Interface Cables to the GR4000

(1) Connection of 1000BASE-SX/1000BASE-LX optical fiber cord
(LC twin-core connector)
Insert the connector into the SFP until it clicks.
LC twin-core connector
Figure 4.10-1 Connection of 1000BASE-SX/1000BASE-LX optical fiber cord
*
136
Connect the RS-232C cross cable to the GR4000 by inserting it into the
BCU
CONSOLE port
SFP
(LC twin-core connector)
NOTE: When removing the connector, do it holding down its tabs.
Screws
520-10-014-20X