Bosch WAW32599SN Instruction Manual And Installation Instructions

Bosch WAW32599SN Instruction Manual And Installation Instructions

Table of Contents

Advertisement

Quick Links

Washing machine
WAW32599SN
en Instruction Manual and Installation Instructions

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WAW32599SN

  • Page 1 Washing machine WAW32599SN en Instruction Manual and Installation Instructions...
  • Page 2 Your new washing machine Display rules : Warning! You have chosen a Bosch washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Power rinse .
  • Page 4: Intended Use

    Intended use The drain pump is blocked, Intended use emergency draining ... . . 29 The drain hose at the siphon is For private domestic use only. blocked ..... . 30 ■...
  • Page 5: Safety Instructions

    Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning.
  • Page 6: Safety For Children

    Safety instructions Safety for children Warning Risk of poisoning! Warning Detergents and care products Danger of death! may be poisonous if If children play with the washing consumed. machine, they may get into life- Keep detergents and care threatening situations or injure products out of the reach of themselves.
  • Page 7: Environmental Protection

    Environmental protection Information on energy and water ■ Environmental consumption: ~ Page 11 The displays provide information protection about the relative level of energy and water consumption in the selected Packaging/used appliance programmes. E n v i r o n m e n t a l p r o t e c t i o n The more indicator lights light up, Dispose of packaging in an the higher the programme's...
  • Page 8: Main Points In Brief

    Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Open the door. To switch on, press Select a plug. Turn on the the # button.
  • Page 9: Getting To Know The Appliance

    Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer ~ Page 23 Operating/display panel Door with door handle 9S Open the door...
  • Page 10: Control Panel

    Getting to know the appliance Control panel All the buttons are sensitive Note: H Changing the default programme (except for the main switch) and only settings: ~ Page 20 need to be pressed lightly. Temperature (s), ■ Spin speed (0), ■...
  • Page 11: Display Panel

    Getting to know the appliance Display panel Further information Stains (x) ~ Page 21 ° | º · Programme progress: Prewash Washing Rinse à Spin - 0 - Programme end Programme end during Rinse Default programme settings: ( Temperature in °C Stop Ž...
  • Page 12: Laundry

    Laundry Some examples of soiling levels can Laundry be found on ~ Page 13 – Light: Do not prewash, select the P repare the laundry SpeedPerfect setting if L a u n d r y necessary Caution! – Normal Damage to the appliance/fabrics –...
  • Page 13: Detergent

    Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note...
  • Page 14: Overview Of Programmes

    Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load Brief explanation of the programme and for which fabrics it is Temperature that can be selected suitable.
  • Page 15 Overview of programmes Programme/type of laundry/information Settings Delicates / Silk Max. 2 kg For delicate, washable fabrics, e.g. made of silk, satin, synthetic Ž - 40 °C fibres or blends (e.g. silk blouses, silk scarves) $, 0 - 800 rpm Use a detergent suitable for machine-washing delicates or Note: .
  • Page 16 Overview of programmes Programme/type of laundry/information Settings *** Drum Clean 0 kg Programme for cleaning and caring for the drum and the outer tub, 80, 90 °C e.g. before running the first wash cycle, if washing frequently at a 1200 rpm low temperature (40 °C or lower) or if an odour has developed after a prolonged period of non-use.
  • Page 17 Overview of programmes Programme/type of laundry/information Settings *** Outdoor / Impregnation Max. 1 kg Wash cycle followed by waterproofing of membrane-coated Ž - 40 °C weatherproof and outdoor clothing or water-resistant fabrics $, 0 - 800 rpm Select a programme. EcoPerfect, SpeedPerfect, Add special detergent for outdoor clothing to compartment II.
  • Page 18 Overview of programmes Programme/type of laundry/information Settings *** Curtains Max. 3.5 kg 3.5 kg heavy curtains or 25 - 30 m² lightweight drapes Ž - 40 °C Notes $, 0 - 800 rpm Shorter rinse and final spin cycles. ■ EcoPerfect, SpeedPerfect, Use a detergent that is suitable for machine-washing curtains.
  • Page 19: Starching

    Overview of programmes Programme/type of laundry/information Settings Shirt / Blouses Max. 2 kg Non-iron shirts or blouses made of cotton, linen, synthetic fibres or Ž - 60 °C blended fabrics $, 0 - 800 rpm Notes EcoPerfect, SpeedPerfect, Shirts/blouses are only given a short spin on the Easy-Iron ■...
  • Page 20: Programme Default Settings

    Programme default settings The maximum speed that can be set Programme default depends on the model and programme that has been selected. settings Ready in The default programme settings are P r o g r a m m e d e f a u l t s e t t i n g s displayed in the display panel after (ñ) selecting the programme.
  • Page 21: Additional Programme

    Additional programme settings Easy-Iron Additional programme settings Reduces creasing thanks to a special spin sequence followed by fluffing and An overview of all additional settings, A d d i t i o n a l p r o g r a m m e s e t t i n g s which can be selected depending on reduced spin speed.
  • Page 22: Operating The Appliance

    Operating the appliance The maximum load and the duration ■ Operating the of the programme (alternately) Information on water and energy appliance ■ consumption Preparing the washing In appliances with a drum light: O p e r a t i n g t h e a p p l i a n c e machine The drum is lit after switching on the appliance, after opening and closing the...
  • Page 23: Measure And Add Detergent And Care Products

    Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pre- treating laundry (e.g. stain removers, prewash sprays, etc.) may cause Measuring aid A For liquid detergent damage if they come into contact with Compartment II Detergent for the main the surfaces of the washing machine.
  • Page 24: Change The Programme Default Settings

    Operating the appliance Change the programme Start the programme default settings Press the A button. The indicator lamp lights up and the programme starts. You can use or change the default settings for this washing cycle. The display panel shows the "Ready in" time while the programme is running or To do this, repeatedly press the the programme length and the...
  • Page 25: Adding Laundry

    Operating the appliance Adding laundry Cancel the programme After starting the programme, you can For programmes at high temperatures: add or remove laundry if necessary. Press the A button. To cool down laundry: Select Rinse. Press the A button to do this. Press the A button.
  • Page 26: Removing Laundry/Switching Off The Appliance

    Appliance settings Removing laundry/switching Appliance settings off the appliance You can change the following settings: Open the door and remove the A p p l i a n c e s e t t i n g s The volume of the buttons and the laundry.
  • Page 27: Changing The Signal Volume

    Sensors Changing the signal volume Sensors Use the Ready in + or - button to A utomatic load sensing change the following settings at the S e n s o r s corresponding programme selector Depending on the type of fabric and positions: load, the automatic load sensing 2: The volume of the information...
  • Page 28: Cleaning And Maintenance

    Cleaning and maintenance Machine housing/control Cleaning and panel maintenance Wipe the housing and the control ■ Warning panel with a soft, damp cloth. C l e a n i n g a n d m a i n t e n a n c e Remove the detergent residue Danger of death! ■...
  • Page 29: Detergent Drawer And Housing

    Cleaning and maintenance Detergent drawer and housing If the washing machine contains detergent or fabric softener residues: Pull out the detergent drawer. Press down the insert and fully remove the drawer. To remove the insert: Push the insert Take the drain hose out of the upwards from below with your finger.
  • Page 30: The Drain Hose At The Siphon Is Blocked

    Cleaning and maintenance Place the service flap back on, lock Filter in the water supply it into place, and close it. blocked First, reduce the water pressure in the supply hose: Turn off the tap. Select any programme (except Rinse/Spin/Empty). Press the A button.
  • Page 31: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. Emergency release F a u l t s a n d w h a t t o d o a b o u t t h e m . E.g.
  • Page 32: Information On The Display Panel

    Faults and what to do about them. Information on the display panel Display Cause/Remedy - P - and ÿ The door is unlocked. It is possible to add laundry. - P - The temperature is too high. Wait until the temperature drops. ■...
  • Page 33: Faults And What To Do About Them

    Faults and what to do about them. Faults and what to do about them. Faults Cause/Remedy Water is leaking from the Attach the drain hose correctly or replace it. ■ machine. Tighten the screw fitting on the supply hose. ■ The machine is not filling Have you pressed the A button? ■...
  • Page 34 Faults and what to do about them. Faults Cause/Remedy Odours in the washing Run the Drum Clean or Cottons90 °C programme without laundry. machine. Add washing powder or a detergent containing bleach. Note: To prevent foaming, only use half the amount of detergent recommended by the detergent manufacturer.
  • Page 35: After-Sales Service

    After-sales service After-sales service If you cannot rectify a fault yourself, A f t e r - s a l e s s e r v i c e contact customer services. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers.
  • Page 36: Consumption Rates

    Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy Water Programme consumption* consumption*...
  • Page 37: Efficiency Test Programmes For Cotton Fabrics

    Technical data Efficiency test programmes for cotton fabrics The following programmes (standard programmes, indicated by ü) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. Standard programmes for Cottons in accordance with the (EU) directive no. 1015/2010 Programme + temperature + button Load Approximate programme...
  • Page 38: Positioning And Connecting

    Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance Customer services location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:...
  • Page 39: Safety Instructions

    Positioning and connecting Safety instructions Installation surface The washing machine be stable Warning Note: so that it does not move around. Risk of injury! The installation surface must be firm The washing machine is very heavy. ■ ■ and level. Be careful when lifting/transporting Soft floors/floor coverings are not the washing machine.
  • Page 40: Installing The Appliance In A Kitchenette

    Positioning and connecting Installing the appliance in a Take the hoses out of the holders. kitchenette Warning Danger of death! There is a risk of electric shock if you touch live components. Do not remove the appliance covering plate. Unscrew and remove all four transport brace screws.
  • Page 41: Hose And Cable Lengths

    Positioning and connecting Hose and cable lengths Left-hand connection ■ Right-hand connection ■ The following are available from Tip: specialist dealers/customer services: Extension for Aqua-Stop and cold ■ water supply hose (approx. 2.50 m); order no. WM Z2380, WZ 10130, CZ 11350, Z 7070X0 A longer supply hose ■...
  • Page 42: Water Inlet

    Positioning and connecting Water inlet When the tap is open, the water flow rate is at least 8 l/min. Warning If the water pressure is higher than this, Danger of death! a pressure-reducing valve must be There is a risk of electric shock if you installed.
  • Page 43: Water Outlet

    Positioning and connecting Water outlet Connection Drainage into a washbasin Warning ■ Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot water (e.g. when draining hot water into a washbasin).
  • Page 44: Levelling

    Positioning and connecting Levelling Notes The mains voltage and voltage ■ Align the appliance using a spirit level. indicated on the washing machine (rating plate) are the same. Incorrect alignment may result in loud The connected load and fuse noises, vibrations and machine required are specified on the rating "movement".
  • Page 45: Before Washing For The First Time

    Positioning and connecting Before washing for the first time The washing machine was thoroughly tested before leaving the factory. In order to remove any water which may be left over from the test, run the first washing cycle without any laundry. Notes The washing machine must be ■...
  • Page 46: Transportation

    Positioning and connecting Transportation Before switching on the appliance again: E.g. when moving house Notes Preparatory work: The transport braces must be ■ Turn off the tap. removed. Reduce the water pressure in the Pour approx. 1 litre of water into ■...
  • Page 47: Aqua-Stop Warranty

    Aqua-Stop warranty Aqua-Stop warranty Only for appliances with Aqua-Stop A q u a - S t o p w a r r a n t y In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: If water damage is caused due to a...
  • Page 48 0344 892 8979 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. Robert Bosch Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY *9001002110*...

Table of Contents