JVC Everio GZ-MG630 Quick Start Manual

Q Close the LCD monitor to turn off the camcorder.
R Attach the battery pack, then connect the AC adapter.
Access lamp Power/Charge lamp
Open the cover
The battery pack is
not charged at the
Battery Pack
time of purchase.
AC Adapter
To AC Outlet
(110V to 240V)
•
The battery (BN-VF808U) will take 110 minutes to
completely charge.
•
The power/charge lamp blinks to indicate charging has
started. When the lamp goes out, charging is fi nished.
L Checking the remaining battery power
Video (!) mode
Press the INFO button twice
or the INFO button and then
;
select .
Still image (#) mode
Press the INFO button.
L How to change the MENU settings
Q Touch the MENU
button.
R Slide your fi nger up
2
and down on the
Touch Sensor.
S Touch the OK button.
3 1
•
The sensors do not function if you touch them with
your fi nger nail or with gloves on.
L How to play back your videos
Q Press the PLAY/REC R Highlight thumbnail
button to display using Touch Sensor
thumbnails on the screen. and touch OK button.
L Using on-screen buttons
To select an on-screen
A
button appearing on
the left side, touch the
portion of the sensor
next to the on-screen
button.
B To select an on-screen button appearing at the
bottom of the screen, touch the buttons underneath
them.
Preparation:
Q Open the LCD monitor to turn on the camcorder.
R Slide the mode switch to select (video or still image)
mode.
S Press the PLAY/REC button to set on recording
mode.
The video camera
icon (!) represents
recording video.
The camera icon (#)
represents recording
stills.
Video (!) mode
Press the START/STOP button to start or stop recording.
•
You can take pictures during video recording only by
pressing SNAPSHOT button.
Still image (#) mode
Press the SNAPSHOT button to take pictures.
To view the video or image you just recorded;
Press the QUICK REVIEW ( )
button.
•
During the preview you can
delete the video or image by
pressing the DELETE ( $ ) button.
Preparation:
•
Load the provided CD-ROM
into the PC.
•
In Windows Vista, the auto
play dialog box appears.
Q Click [Easy Installation].
Follow the on-screen
instructions.
R Click [Next].
S Click [Finish].
•
Everio MediaBrowser icon is
created on the desktop.