Connecting The Monitor To The Av Device - Hitachi CML155XW Service Manual

HITACHI CML155XW LCD Monitor Service Manual (v1.0)
Audio 1 jack
5) First turn the PC power switch ON. Then apply power to the display by pressing the power
button to turn the monitor on. The power indicator LED will then illuminate.
Note:
Do not force the cable into the connector; line it up carefully so that you don't
bend the pins.
5.2 Connecting the monitor to an AV device
1) Plug the 4-pin s-video signal cable (or CVBS cable) into the S-video (or CVBS) Video
Input port on the back of the display. Connect the other end of the video cable into your
AV's video port. The assignment of the pins of the connector is as follows:
Power jack
CVBS video
input port
14
S-video video
input port