3D Global SCALEREO User Manual

The FPW (Foot Pedal - Wireless) can be used to control the most important camera features of
®
your SCALEREO system, if equipped with an adequate camera module. For details on your
®
specific SCALEREO
1. Commissioning
1.1 Connection
•
Connect the small FPW antenna with the
designated socket at the rear side of your
SPU.
1.2 Assigning / deleting a FPW
If the FPW was delivered together with your system, it is already assigned to it.
To delete or reassign a FPW,
•
open the menu on your SCALEREO system by using your ControlBar,
•
select the tab "Footswitch",
•
press "Add" or Delete" and shortly after tap once briefly any of the pedals of that FPW,
which should be added or deleted.
TD_UserManual_FPW_EN
UserManual
Wireless Foot Pedal
system, please refer to the documentation provided with the system.
Rev. 1.0 / 16.03.2022
3D Global Solutions GmbH
Am Krebsgraben 15 / Geb. 2.2
DE-78048 Villingen-Schwenningen
www.3dgs.eu / info@3dgs.eu
Tel: +49 (0) 7721-916 19-60
Page 1 / 2