Black & Decker BXKE2202E Manual page 5

♦ Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the cleaning section.
Filling with water:
♦ You must fill the water compartment before turning on
the appliance.
♦ Remove the appliance from its stand.
♦ Open the lid by pressing the opening button.
♦ Fill the water compartment taking care to observe the
MAX and MIN level.
♦ Close the lid.
♦ Put the appliance back onto its stand
♦ Avoid spillage onto electrical connections.
Use:
♦ Take the length of cable required out of the housing.
♦ Attach the appliance to its base / connector making sure
that it is correctly fitted into place.
♦ Connect the appliance to the mains.
♦ Once the water has boiled the appliance will switch off
automatically.
♦ The appliance can be switched on again using the switch
once the control device has cooled, if it is not switched
on again, do not force it, allow it to cool.
Once you have finished using the appli-
ance:
♦ Unplug the appliance from the mains.
♦ Put the cable back in the cable housing.
♦ The cable housing means you can remove and have
available the required length of cable for working with the
appliance, preventing accident risk situations.
♦ Remove the water from the inside of the appliance.
♦ Clean the appliance.
Cable compartment
♦ This appliance has a cable compartment situated on its
underside.
Carry handle/s:
♦ This appliance has a handle on the side of the body,
which facilitates comfortable transport.
CLEANING
♦ Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
(Original instructions)
♦ DO NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
♦ Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
♦ Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
♦ Neither parts of this appliance are suitable for cleaning in
the dishwasher.
♦ Then dry all parts before its assembly and storage.
How to deal with lime scale incrustations:
♦ For the appliance to work correctly it should be kept free
of limescale or magnesium incrustations caused by the
use of hard water.
♦ To prevent this kind of problem, we recommend the use
of water with low lime or magnesium mineralisation.
♦ However, if it is not possible to use the kind of water
recommended above, you should periodically remove
the lime scale from the appliance:
Every 6 weeks if the water is "very hard".
Every 12 weeks if the water is "hard".
♦ A specific anti-lime scale product should be used on this
kind of product.
♦ Homemade solutions are not recommended in the decal-
ing of this appliance, such as the use of vinegar.
ANOMALIES AND REPAIR
♦ Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
For EU product versions and/or in case that
it is requested in your country:
Ecology and recyclability of the product
♦ The materials of which the packaging of this appliance
consists are included in a collection, classification and
recycling system. Should you wish to dispose of them,
use the appropriate public recycling bins for each type
of material.
♦ The product does not contain concentrations of
substances that could be considered harmful to the
environment.
This symbol means that in case you wish to
dispose of the product once its working life has
ended, take it to an authorised waste agent for
ENGLISH
5