Update Software Through The Internet; Update The Onscreen Help - Philips HTB7150/93 User Manual

2
Press (Home).
3
Select [Setup], and then press
4
Select [Advanced] > [Software update]
> [USB].
5
Follow the onscreen instructions to
confirm the update.
» Update process takes about 5 minutes
to complete.
» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.
Update software through the
Internet
1
Connect your home theater to a home
network with a high-speed Internet access
(see 'Connect and set up a home network'
on page 15).
2
Press (Home).
3
Select [Setup], and then press
4
Select [Advanced] > [Software update] >
[Network].
» If an upgrade media is detected, you
are prompted to start or cancel the
update.
» Downloading of the upgrading file may
take long, depending on your home
network condition.
5
Follow the onscreen instructions to
confirm the update.
» Update process takes about 5 minutes
to complete.
» Once complete, the home theater
automatically switches off and restarts.
If it does not, disconnect the power
cord for a few seconds and then
reconnect it.
EN
32

Update the onscreen help

.
If the current version of the onscreen help is
lower than the latest version available on www.
philips.com/support, download and install the
latest onscreen help (see 'Check software
version' on page 31).
What you need
•
•
•
Step 1: Download the latest onscreen
help
1
2
3
.
4
5
6
A USB flash drive that is FAT or NTFS-
formatted, with at least 35MB of memory.
Do not use a USB hard drive.
A computer with internet access.
An archive utility that supports the ZIP file
format.
Connect a USB flash drive to your
computer.
In your web browser, go to www.philips.
com/support.
At the Philips support website, find your
product and click on User manuals, and
then locate the User Manual Upgrade
Software.
» The help update is available as a zip
file.
Save the zip file in the root directory of
your USB flash drive.
Use the archive utility to extract the help
update file in the root directory.
» A file named 'HTSxxxxeDFU.zip' is
extracted under the UPG folder of
your USB flash drive, 'xxxx' being the
model number of your home theater.
Disconnect the USB flash drive from your
computer.