Remote Button Descriptions - Sony STR-V323 Operating Instructions Manual

Remote Button Descriptions

For buttons not described on previous pages and buttons with names different from the buttons on the main unit.
Remote Button
0-9
>10
CH/PRESET
+/–
D. SKIP
DISC
0/)
=/+
P
(
p
9
r
r + (
24 GB
Operates Function
Receiver Selects preset numbers.
CD player/MD Selects track numbers.
recorder/DVD 0 selects track 10.
player
Selects channel numbers.
TV/VCR/LD
Selects track numbers over
CD player/
Tape deck/ 10.
MD recorder
Receiver Scans and selects preset
stations.
TV/VCR/LD Selects preset channels.
CD player Skips discs (CD player
with multi-disc changer
only).
Select discs (Mega storage
CD player
CD player only).
CD player/ Searches tracks (forward
DVD player or backward).
Tape deck/MD Fastforwards or rewinds.
recorder/VCR
CD player/ Skips tracks.
MD recorder
CD player/ Pauses play or record.
(Also starts recording with
Tape deck/MD
components in record
recorder/VCR/
DVD player standby.)
CD player/ Starts play.
Tape deck/MD
recorder/VCR/
DVD player
CD player/ Stops play.
Tape deck/MD
recorder/VCR/
DVD player
Tape deck Starts play on the reverse
side.
Tape deck Sets tape decks to the
record standby mode.
Starts recording when
Tape deck/
pressed with ( (or 9 on
MD recorder/
tape deck).
VCR
Remote Button Operates
ENTER TV/VCR/LD
TV/VIDEO TV/VCR
AV 1/u TV/VCR/
LD Player/
(power)
DVD player
-/- - TV
POSITION TV
TV
SWAP
TV
P IN P
TV
MASTER VOL
+/–
TV
MUTING
ANT TV/VTR VCR
* Only for Sony TVs with the picture-in-picture function
Note
Some Sony equipment cannot be controlled by this remote as
shown in the table above.
Function
Changes channels when
used with 0-9.
Selects input signal: TV
input or video input.
Turns on or off the power.
Selects the channel entry
mode, either one or two
digit (in Europe only).
Changes the position of
the small picture.*
Swaps the small and the
large picture.*
Activates the picture-in-
picture function.*
Normally, adjusts the
master volume of the
receiver.
Normally, mutes the
sound from the receiver.
Selects output signal from
the aerial terminal: TV
signal or VCR programme.