Attaching The Filters - Samsung AX32 G3100G Series User Manual

Hide thumbs Also See for AX32 G3100G Series:

Table of Contents

Attaching the filters

STEP 1 Place the 2-in-1 filter.

• Confirm that the filter attachment direction is correct before

attaching it.

STEP 2 Insert the pre-filter.

• Insert the pre filter into the grooves at the bottom of the

product, and insert the clip at the top.

STEP 3 Closing the front panel

• Insert the front panel into the grooves at the bottom of the

product.

• Push and close the front panel, ensuring that the 8 latches

are inserted.

STEP 4 Turning off the filter replacement reminder after

replacing filters

• Press and hold the

button for more than 3 seconds.

NOTE

• When filter replacement is needed, the filter replacement

reminder on the top display blinks. Replace with a new filter

and turn off the filter replacement reminder.

• If the filters are saturated with surrounding odours and the

room smells bad, replace the filters and turn off the filter

replacement reminder.

English

Table of Contents