Advertisement
This section provides instructions and illustrations for rack mounting the Dell Secure Mobile Access 6200/7200.
The SMA 6200/7200 appliance is designed to be mounted in a standard 19-inch rack. The product packaging contains a slide rail kit
for mounting the appliance in a four-post cabinet. Before installing the appliance in an equipment rack, the rails must be attached
to the appliance and to the rack posts.
You will need the following tools and hardware for installation:
•
Phillips (cross head) screwdriver (#1 bit and #2 bit)
•
Anti-static wrist strap and conductive foam pad (recommended)
•
Two outer rails
•
Four inner rails
•
Crosshead threaded screws
CAUTION:
Do not use slide/rail mounted equipment as
a shelf or a work space.
Rack mounting the appliance
Dell Secure Mobile Access 6200/7200 Getting Started Guide
6
37
Advertisement
