Table of Contents
Advertisement
Part names and functions
(1) OBV-AIG part names and functions
Part names and functions
[Upper side]
1) Analog input terminal
No.
Name
1) Analog input terminal
2) Connector to basic unit
3) DIP switches
(2) OBV-AIOG part names and functions
Part names and functions
[Upper side]
1) Analog input / output terminal
No.
Name
1) Analog input / output terminal Terminals to connect analog input / output signals.
2) Connector to basic unit
3) DIP switches
Terminals to connect analog input signals.
Cable diameter : Single wire : 0.2 mm
Strand wire : 0.2 mm
A connector is located at the back side to connect basic unit.
DIP switches to change voltage / current mode of analog input signals.
Please set these DIP switches before insertion of the option board.
Cable diameter : Single wire : 0.2 mm
Strand wire : 0.2 mm
A connector is located at the back side to connect basic unit.
DIP switches to change voltage / current mode of analog I/O signals.
Please set these DIP switches before insertion of the option board.
- 3 -
Model name
OBV-AIG
Mass
0.02 kg (0.04 lb)
[Back side]
3) DIP switches
Details
2
2
to 1.5 mm
2
2
to 1.0 mm
Model name
OBV-AIOG
Mass
0.02 kg (0.04 lb)
[Back side]
3) DIP switches
Details
2
2
to 1.5 mm
2
2
to 1.0 mm
2) Connector to
basic unit
2) Connector to
basic unit
NJI-669(X)
Advertisement
Table of Contents
