About This Manual Thank you for purchasing this product. The manual describes how to install, set up, use and maintain the product. The main purpose of the manual is to instruct how to operate the product correctly and safely. Please follow all the safety and warning instructions in the manual to avoid personal injury and product damage.
1. Safety Precautions 1.1 Warning Stickers In order to avoid injury to related people and damage to property, please observe the followings: The following marks can be used to indicate the magnitudes of risk and damage caused by ignorance or improper operation: Serious Injury: refers to the situations in which hospital treatment or long-term treatment will be accepted because of losing sight, getting hurt, getting burnt, electric shock, fracture or intoxication.
1.3 Safety Precautions The owner shall pay attention to the followings when placing, checking and repairing machine to ensure player’s security and avoid damage: Page 8...
2. Product Description 2.1 Product Specification Location Indoor Only Dimension 1300(W) x 2390(D) x 2350(H)mm Rated Voltage, Frequency AC220V 50Hz /60Hz AC110V 60Hz Power Consumption 750w Weight 285 kg Temperature Range 5~40 °C *110V voltage can be set through the transformer and fuse. Please contact the distributor for details. NOTE: The contents herein described are subject to change without notice.
2.5 Packing List Please check the following items after purchasing our product. If any part is missing or damaged, please contact our salesperson. Name Material/Specification Quantity Remarks Image no: Adhesive strip connecting SPCC-1.2T ACG2- plate 0000A02 Outer hexagon three M8*35 (Black plated) combination screws Outer hexagon three M8*45 (Black plated)
2.6 Install Direction Guidelines of Cabinet Installation: Step 1: Fix the support frame to the LCD Step 2: Install the support cover; frame; Step 3: Remove the rear cover of the light box; Step 4: Place the light box on the LCD frame (At least 2 people to operate);...
Page 22
Guidelines of Cabinet Installation: Step 5: Fix the light box on the LCD frame from the Step 6: Remove the 2 upper cover plates of the rear (6 screws); cross beam; Step 7: Pass the fixing ropes of the gun through Step 8: Fix the gun cord slot on the beam as the holes of the beam;...
Page 23
Guidelines of Cabinet Installation: Step 9: Insert the beam from the fixed opening of Step 10: Fix the beam from behind the light the light box (At least 3 people to operate); box (6 screws); Step 11: Connect the light box and beam lines; Step 12: Fix the air cannon on the beam and connect the wire;...
Page 24
Guidelines of Cabinet Installation: Step 13: Install the front cover of the light Step 14: Connect the light box and the LEDs on both sides of the LCD frame wire, and install the adhesive strip connection board; box; Step 15: Install the beam cover and the rear cover -Installation is completed.= of the light box.
3. Linking and Networking In the below figure, it shows how the cabinets (no. of cabinets from 2 to 4) should be linked up with the router by cables separately. Note: Please make sure all games are in the same version in order to be linked with. In the router, the LAN ports are where cable(s) to PCS should be inserted;...
4. Game Description and AO MENU 4.1 Game Description 4.1.1 GAME FEATURE Immersive Missions with unique VR aiming Control with Haptic Rumble feedback Up to 4 players linked play 5 Exotic Stages with Final Stage to face the BOSS ...
Stages There are total of 5 stages. Difficulties There are 3 levels of difficulties: Easy, Normal and Hard Game Modes 1 PLAYER SOLO MULTIPLAYER (support link-play up to 4 players at a time) 4.2 Game Flow 4.2.1 Front-End MENU (1) Insert Coin Page Insert coin page will be appeared to ask player to insert coins and start the game.
Page 30
(2) Warning Message A warning screen will appear after game is started. (3) Select Game Mode 1 PLAYER SOLO and MULTIPLAYER (support link-play up to 4 players at a The game has two game modes: time) Page 30...
(4) Loading Screen Learning Tips will be shown in loading screen. 4.2.2 In-Game HUD (5) In-Game HUD Game START Game starts at once right after the loading is finished. Page 31...
Page 32
UI Screen During the game, status of the player will be displayed around the screen. 1 - Game countdown time 5 - Enemy's health 2 - Player’s health 6 - Enemy’s weak point(s) 3 - Number of bullets 7 - Enemy position locator 4 - Countdown enemy attack time Page 32...
4.2.3 Back-End MENU (6): Player Result The game ends when the player completes the stage or has no life remaining or time is up. After the game is over, the performance of all players in the stage will be displayed. Page 33...
2. Turn off the host computer of the VR Agent machine. 3. Please insert the USB Drive into the host computer of VR AGENT machine. 4. Restart the host computer of the VR AGENT machine, the game launcher will automatically start and install updates from the USB drive.
4.4 Operator MENU Arcade Operator 1. Under the game Title Screen, press the [Menu] key of the coin control box to enter the [Arcade Operator], the main arcade operator menu is shown as below. 2. In the main menu screen, use the [LEFT] and [RIGHT] arrow buttons to select a menu item, press the [START] button to enter the sub-menu list.
4.4.1 Game Settings Under Game Settings, settings related to game-play can be adjusted here. 1. Please press the [Test] button in the control box of the coin gate of the cabinet to enter [Arcade Operation]. The main menu is shown in the figure below. 2.
Page 37
4.4.1 Game Settings [Game Settings], you can set the following items: 1. Enter Setting Items Setting Content 1-99 Player Life Difficulty 1/2/3 (1 = the easiest) Dynamic Difficulty On/Off Reset Settings Back 2. After setting or testing, select [back] in the main menu, settings will be saved automatically. Please press [Service] to exit the operation interface.
4.4.2 Bookkeeping Settings [Bookkeeping Settings], you can check the following items: 1. Enter Setting Items Check Content Play Info Total Time On Total Coin In Total Credit In Total Credit Continues Total Service Credit Total Service Credit Continues Total Play Single Player Plays Multi Player Plays Single Player Continue...
4.4.3 Credit Settings [Credit Settings], you can set the following items: 1. Enter Setting Items Setting Content Credit Count Service Credits Clear Credits Entry Type Coin/Card Swipe Credit Settings Free Play/ X Coins X Credit Continue Settings Same as Credit Settings/ X Coins X Credit Reset Settings Back 2.
4.4.4 Input Settings [Input Settings], you can set the following items: 1. Enter Setting Items Setting Content Trigger Button On/Off Reload Button On/Off Start Button On/Off Down On/Off Option Cycle / Select On/Off Test / Exit On/Off Back / Service On/Off IO Board Connected/Not Connected...
4.4.5 Output Settings [Output Settings], you can set the following items: 1. Enter Setting Items Setting Content Master Volume Idle/Attract Volume Sound Test Off/Left/Right/Sub Light Test Off/Gun Rack/Gun/ Monitor Side Left/ Monitor Side Right/ Logo Left/ Logo Right Air Cannon Test On/Off Motor Test On/Off...
4.4.6 Clock Settings [Clock Settings], you can set the following items: 1. Enter Setting Items Setting Content Year Year Month Month Date Date Hour Hour Minute Minute Second Second Apply Back PLEASE NOTE: Setting the time or date to the past will require the game to restart.
4.4.7 Network Settings [Network Settings], you can set the following items: 1. Enter Setting Items Setting Content Network Status Linked/Linked [X] Cabs / No Link Group ID 1/2/3/4 Cabinet ID 1/2/3/4 IP Range Range 1/ Range 2/ Range 3 Confirm IP Range Confirm IP may take 2 minutes Reset Settings Back...
4.4.8 Language Settings [Language Settings], you can set the following items: 1. Enter Setting Items Setting Content Language English 简体中文(Simplified Chinese) 繁體中文 (Traditional Chinese) Reset Settings Back 2. After setting or testing, select [back] in the main menu, settings will be saved automatically. Please press [Service] to exit the operation interface.
4.4.9 Reset All Settings On the "Reset All Settings" page, you can reset all settings to the factory settings. 1. Select [Reset All Settings] and press the [START] button to restore all the settings in the arcade to the default values.
6. Maintenance and Service 6.1 Maintenance and Service Even though the machine works normally for a long time, the fault will occur. Therefore, please perform routine check and maintenance concerning the following to ensure a long- term use. Page 48...
10. After-Sales Service Honorable customers! Thank you for purchasing our product! For your benefits, if you find any fault during the operation of the product, please hire a technician who obtains a certificate related to mechanical engineering, electrical engineering or who engages in routine maintenance, repair and management of amusement machine to check the machine and inform us the fault in a timely manner.