Installing A Power Supply Module - Cisco SFS InfiniBand Server Switch SFS 7000P Hardware Installation Manual

Installing a Power Supply Module

Installing a Power Supply Module
Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution
when servicing. Statement 1034
Never place your hand inside an empty module bay or anywhere inside the
Caution
Cisco SFS 7000P and SFS 7000D Server Switches.
Unused module bays always should have a switch filler panel over the bay to ensure proper safety,
Caution
ventilation, and cooling.
To insert a power supply module, follow these steps:
Ground yourself appropriately.
Step 1
Step 2 Remove the filler panel from the power supply bay with a number 1 Phillips or a slotted screwdriver, if
it is still in place. (See
Figure 4-1
Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
4-2
Figure 4-1.)
Removing a Filler Panel from the Switch
Chapter 4 Installing Field Replaceable Units
OL-10853-01