Eaton Cooper Lighting Fail-Safe Terrapin Series Installation Instructions Manual
Eaton Cooper Lighting Fail-Safe Terrapin Series Installation Instructions Manual

Eaton Cooper Lighting Fail-Safe Terrapin Series Installation Instructions Manual

Incandescent and compact fluorescent luminaires
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

697916
ADC140283
Installation Instructions – Terrapin Series Incandescent and Compact
Fluorescent Luminaires
Instructions d'installation - Luminaires à incandescence et
fluocompacte pour modèles Terrapin
Instrucciones de instalación de luminarias incandescentes y de
fluorescencia compacta Serie Terrapin
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
Visible and Hidden Freight Damage: Thoroughly inspect
for any shipping damage and document damage with the
delivering carrier.
General: Compare the catalog description listed on the
packing slip with the fixture label on the housing to ensure
you have received the correct product. For best results,
install and maintain in accordance to these instructions.
Safety: This fixture must be wired in accordance with
the National Electrical Code or National Electrical Safety
Code and applicable Local Codes and Ordinances. Proper
grounding is required to ensure personal safety. Carefully
observe all grounding procedures under the installation
section. All work should be conducted by a qualified
electrician.
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance.
All statements, technical information and
N
otee:
recommendations contained herein are based on
information and tests we believe to be reliable.
The accuracy or completeness thereof is not
guaranteed. In accordance with Cooper Lighting
"Terms and Conditions of Sale" , and since these
conditions are outside our control, the purchaser
should determine the suitability of the product
for their intended use and assumes all risk and
liability whatsoever in connection herewith. Fixtue
design and dimensions are subject to change
without notice. These instructions do not claim
to cover all details or variation in the equipment,
procedure or process described, or to provide
directions for meeting every possible contingency
during installation, operation or maintenance.
When additional information is desired to satisfy
a problem not covered sufficiently for the user's
purpose, please contact you nearest representative.
Brand Logo
reversed out of
black
INS #
INS #
INS #

Advertisement

Table of Contents
loading

Summary of Contents for Eaton Cooper Lighting Fail-Safe Terrapin Series

  • Page 1 Brand Logo reversed out of black INS # INS # INS # 697916 ADC140283 Installation Instructions – Terrapin Series Incandescent and Compact Fluorescent Luminaires Instructions d’installation - Luminaires à incandescence et fluocompacte pour modèles Terrapin Instrucciones de instalación de luminarias incandescentes y de fluorescencia compacta Serie Terrapin All statements, technical information and IMPORTANT: Read carefully before installing fixture.
  • Page 2: Installation

    If the lens has a factory applied trim color, these solvents will remove the paint in addition to damaging plastic lens. Replacement of entire lens is recommended in this case. Figure 2. EyeLid (Downlight Installation) Installation Instructions – Terrapin Series Incandescent and Compact Fluorescent Luminaires IS-134 ADC140283 www.eaton.com...
  • Page 3 à nouveau. Ceci permet d’insérer correctement la lampe afin d’obtenir la meilleure connexion mécanique et électrique. Installez la lentille et serrez les vis. Instructions d’installation - Luminaires à incandescence et fluocompacte pour modèles Terrapin IS-134 ADC140283 www.eaton.com...
  • Page 4: Entretien

    Nous recommandons de remplacer la lentille complète si cela se produit. Paupière (installation avec éclairage vers le bas) Figure 2. Instructions d’installation - Luminaires à incandescence et fluocompacte pour modèles Terrapin IS-134 ADC140283 www.eaton.com...
  • Page 5: Instalación

    Esto asentará la lámpara correctamente para una mejor conexión mecánica y eléctrica. Vuelva a colocar la lente y ajuste los tornillos. Instrucciones de instalación de luminarias incandescentes y de fluorescencia compacta Serie Terrapin IS-134 ADC140283 www.eaton.com...
  • Page 6: Mantenimiento

    En ese caso, se recomienda sustituir toda la lente. Reborde (instalación con iluminación hacia abajo) Figura 2. Instrucciones de instalación de luminarias incandescentes y de fluorescencia compacta Serie Terrapin IS-134 ADC140283 www.eaton.com...
  • Page 8 All trademarks are property Eaton’s Cooper Lighting Business of their respective owners. 1121 Highway 74 South Peachtree City, GA 30269 Eaton est une marque de commerce Cooperlighting.com déposée. Toutes les autres marques de commerce sont la propriété de leur © 2014 Eaton propriétaire respectif.

Table of Contents