Table of Contents
Advertisement
OOB service provisioning
About this task
In this task, the user connects the USB flash drive with the capsule files from the host machine, inserts the flash drive to a USB
port on the EGW-3200 target board, and updates the MAC capsule and OOB capsule binary files.
Update the MAC capsule
Steps
1. To update the MAC capsule, use the tool (Phy.zip) and update the MAC address under UEFI Shell.
2. Use CapsuleApp.efi to update the MAC capsule under UEFI Shell directly.
Usage: CapsuleApp.efi capsule.out.bin
3. Perform a hard reset by turning the power off and on after updating the MAC address.
Update the OOB credentials capsule
Steps
1. To update the OOB capsule, use CapsuleApp.efi with capsule binary under UEFI Shell directly.
Usage: CapsuleApp.efi OobCapsule.bin
2. Perform a hard reset by turning the power off and on after updating the OOB capsule.
3. At the BIOS menu, select Chipset, as shown in the following figure.
4. Find the OOB Cloud Type, OOB Cloud URL, and OOB Cloud Port information. The OOB feature state and provisioning
state should be Enabled, as shown in the following figure.
Figure 53. BIOS menu
Activate OOB commands using Azure
Prerequisites
A device management cloud account is created and the EGW-3200 is successfully provisioned with the OOB credentials to
connect to the cloud.
Setting Up the Windows 10 Operating System
53
Advertisement
Table of Contents
