1MAC203317-MB A
Section 3
3.1
Table 5:
Device profile document
DNP3 device profile document
Vendor name:
Device name:
Highest DNP level supported:
For requests:
For responses:
Notable objects, functions, and/or qualifiers supported in addition to the highest DNP levels supported (the complete list is described in the
attached table):
For static (non-change-event) object requests, request qualifier codes 07 and 08 (limited quantity), and 17 and 28 (index) are supported.
Static object requests sent with qualifiers 07, or 08, will be responded with qualifiers 00 or 01.
16-bit and 32-bit Analog Change Events with Time may be requested.
Maximum data link frame size (octets):
Transmitted:
Received:
Maximum data link re-tries:
○
None
○
Fixed
●
Configurable (0...65535)
Requires data link layer confirmation:
○
Never
○
Always
○
Sometimes
●
Configurable as: "Never", "Only for multi-frame messages", or "Always"
Requires application layer confirmation:
○
Never
Table continues on next page
RET615 ANSI
Point List Manual
DNP3 protocol implementation
DNP3 device profile
The following table provides a device profile document in the standard format defined
in the DNP3 Subset Definitions Document. While it is referred to in the DNP3 Subset
Definitions as a document, it is in fact a table, and only a component of a total
interoperability guide. The table, in combination with the Implementation table and the
point list tables provides a complete configuration/interoperability guide for
communicating with a device.
Level 2+
Level 2+
292
292
DNP3 protocol implementation
ABB Inc.
RET615
Device function:
○
Master
●
Slave
Maximum application fragment size (octets):
Transmitted:
Configurable (256...2048)
Received:
2048
Maximum application layer re-tries:
●
None
○
Configurable
Section 3
25