Front Panel Description
Port Mode LED
The port mode LED indicates the STAT (port status), UTL (bandwidth utilization), and ID
(unit identification) modes.
Note
STAT Mode
In port status mode, port LEDs show individual port status (see Table 1-5).
Table 1-5
Color
Off
Green
Flashing green
Rapidly alternating green/amber
Alternating green/amber
This indication remains until the link fault is corrected. Possible causes are autopartition, jabber,
1.
and isolated (carrier integrity error). Note that this state should not be confused with the "no link
status" (link down) indication where the link is not operational.
1-6 FastHub 116T Installation Guide
Port 16 (the uplink port) uses the port 16x LED.
Port Status LED Description
Port Status
No link (link down).
Link operational (with no activity).
Link operational (with activity).
1
Faulty link
.
FastHub reset in progress.