7.1 Before Using For The First Time - Siemens HS636GD.1I User Manual And Installation Instructions

Table of Contents

Advertisement

1.
Place the wire rack on the universal pan so that
both spacers
​ ⁠ are on the rear edge of the univer-
sal pan.
2.
Insert the universal pan between the two guide rods
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
7  Before using for the first time
Implement the settings for the initial configuration. Calibrate the appliance. Clean the appliance and accessories.
7.1 Before using for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water. To
ensure that the appliance can reliably remind you to
descale it when required, you must set your water hard-
ness range correctly.
ATTENTION!
If the wrong water hardness has been set, the appli-
ance cannot remind you to descale it at the right time.
Set the water hardness correctly.
Using unsuitable liquids may damage the appliance.
Do not use distilled water, highly chlorinated tap wa-
ter (>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
Setting
1
0 (softened)
1 (soft)
2 (moderately hard)
3 (hard)
2
4 (very hard)
1
Only set this if you will be using solely softened water.
2
Also set for mineral water. Only use non-carbonated mineral water.
7.2 Carrying out the initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you must configure the settings before you can use it. It
may take a few seconds for the settings to appear on
the display.
Setting the language
1.
Use the rotary selector to select the required lan-
guage.
2.
Press ​ ⁠ .
a The next setting appears.
6.4 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.siemens-home.bsh-group.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
Malfunctions may occur when using filtered or deminer-
alised water. The appliance may request that you top
up the water tank even though it may be full, or opera-
tion with steam is cancelled after approx. two minutes.
Tip: If you use mineral water, set the water hardness
range to "very hard". If you use mineral water, you must
only use non-carbonated mineral water.
Tip: If your tap water is very hard, we recommend that
you use softened water. If you use only softened water,
you can set your appliance to the "softened" water
hardness range.
Water hardness in
mmol/l
-
Up to 1.5
1.5-2.5
2.5-3.8
Above 3.8
Setting the time
1.
2.
a The next setting appears.
Setting the date
1.
2.
3.
4.
5.
6.
Before using for the first time en
If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ra-
tio of one to one.
German hardness in
°dH
-
Up to 8.4
8.4-14
14-21.3
Above 21.3
Turn the rotary selector to set the current time.
Press ​ ⁠ .
Use the rotary selector to set the current day.
Press ​ ⁠ .
Use the rotary selector to set the current month.
Press ​ ⁠ .
Use the rotary selector to set the current year.
Press ​ ⁠ .
French hardness °fH
-
Up to 15
15-25
25-38
Above 38
11

Advertisement

Table of Contents
loading

Table of Contents