Removing And Replacing A Switch Fabric Card - Cisco XR 12406 Installation Manual

Chapter 5 Maintaining the Router

Removing and Replacing a Switch Fabric Card

Caution
Step 1
OL-13831-01
Removing and Installing a Clock and Scheduler Card, Switch Fabric Card, or Alarm Card
Use the following procedure to remove and replace a SFC.
Two CSCs are required to remove and replace a SFC while the system remains
powered on. If the router has a non-redundant configuration and only one CSC is
installed, you must power off the router before removing the SFC.
Loosen the captive screw on each side of the SFC faceplate
Figure 5-33 Removing and Installing a Switch Fabric Card
CI SC O 12
00 0
GIG AB IT SERI ES
SW ITC H
RO UT ER
1
SFC
2 Captive screw (2)
GIG AB
IT RO UT
E PR OC
ES SO R
1
3
3
Ejector lever (2)
—
Cisco XR 12406 Router Installation Guide
(Figure 5-33).
2
5-53