Required Variables - Cisco 1700 Manual

Disaster Recovery with TFTP Download
Note

Required Variables

Optional Variables
Cisco 1700 Series Router Software Configuration Guide
B-6
The commands described in this section are case sensitive and must be entered
exactly as shown in the lists.
The following variables must be set with the commands shown before using the
tftpdnld command:
Variable
IP address of the router.
Subnet mask of the router.
IP address of the default gateway of the
router.
IP address of the TFTP server from
which the software will be
downloaded.
The name of the file that will be
downloaded to the router.
The following variables can be set with the commands shown before using the
tftpdnld command:
Variable
Whether or not the router performs a
checksum test on the downloaded
image:
1—Checksum test is performed.
0—No checksum test is performed.
Appendix B
Command
IP_ADDRESS= ip_address
IP_SUBNET_MASK= ip_address
DEFAULT_GATEWAY= ip_address
TFTP_SERVER= ip_address
TFTP_FILE= filename
Command
TFTP_CHECKSUM=setting
ROM Monitor
78-5407-03