Sharp MX-C607P User Manual page 42

Understanding the printer menus
Menu item
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
Off
On*
Device Operations
Automatic Media Type Detection
Off
On*
Toner patch sensor setup
Calibration frequency preference
Disabled
Fewest color adjustments
Fewer color adjustments
Normal*
Better color accuracy
Best color accuracy
Toner patch sensor setup
Full calibration
Toner patch sensor setup
Print TPS information page
Note: An asterisk (*) next to a value indicates the factory default setting.
Out of Service Erase
Menu item
Out of Service Erase
Memory Last Sanitized
Hard Disk Last Sanitized
Out of Service Erase
Sanitize all information on nonvolatile memory
Erase all printer and network settings
Erase all apps and app settings
Erase all shortcuts and shortcut settings
Sanitize all information on hard disk
Erase downloads (Erase all macros, fonts, PPOs, etc.)
Erase buffered jobs
Erase Held jobs
Description
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Set the printer to detect the paper type of a page being loaded.
Set the printer to put down the correct amount of toner to
maintain color consistency.
Run the full color calibration.
Print a diagnostic page that contains information on toner
patch sensor calibration.
Description
Show information on when the printer memory or
hard disk was last sanitized.
Note: Hard Disk Last Sanitized appears only when a
hard disk is installed.
Clear all information on non‑volatile memory and
information on the hard disk.
Note: Sanitize all information on hard disk appears
only when a hard disk is installed.
42