Button Manager Settings - Sharp AR-7024 Operation Manual

BUTTON MANAGER SETTINGS

Once installed, BUTTON MANAGER normally runs in the background in the Windows operating system. If you need
to change BUTTON MANAGER settings, follow the steps below.
For details on BUTTON MANAGER settings, see BUTTON MANAGER Help.
"OUTLINE OF BUTTON MANAGER" (p.80)
1
Right-click the BUTTON MANAGER
icon ( ) on the task bar, and select
"Settings" from the pop-up menu.
If the BUTTON MANAGER icon does not
Note
appear on the task bar, click the "Start"
button, select "All Programs", select "Sharp
Button Manager AC", and then click
"BUTTON MANAGER" to start BUTTON
MANAGER.
2
Click the tab of the scan menu that
you want to set up.
3
Select the start-up application in the
"Application Selection" area.
When the "Show TWAIN setting screen when
Note
scanning" checkbox is selected, the scan
setting screen appears when scanning is
executed to let you adjust the scanning
conditions.
BUTTON MANAGER scan menu (factory
default)
Display/BUTTON
MANAGER menu
ScanMenu SC1:
ScanMenu SC2:
ScanMenu SC3:
ScanMenu SC4:
ScanMenu SC5:
ScanMenu SC6:
The start-up application must be installed
Note
before using.
The setting screen of
BUTTON MANAGER will
open.
Application that starts
Sharpdesk
Email
FAX
OCR
Microsoft Word
Filing
4
Set up the "Colour Mode", "Edge" and
other scan settings in the "Scan
Setup" area.
5
Click the "OK" button.
This completes the settings.
SCANNER FUNCTIONS
81
5