Cisco Linksys SPA3102 User Manual page 26

Voice Gateway with Router
Action Command
(press these
keys on the
telephone)
Set the Mode 201
Enable/Disable WAN 7932
Access to the
Web-based Utility
Manual Reboot 732668
Factory Reset 73738
18
Interactive Voice Response Menu
Choices
Press 0 to select the
router/NAT mode.
Press 1 to select the
bridge/switch mode.
Press 1 to enable.
Press 0 to disable.
Press 1 to confirm.
Press * (star) to cancel.
Description
If the Voice Gateway acts as the router for
your network, use the router/NAT mode.
If your network already has a router, use the
bridge/switch mode.
Use this setting to enable or disable WAN
access to the Web-based Utility. (This Utility
lets you configure the Voice Gateway.)
After you hear, "Option successful," hang up
the phone. The Voice Gateway will
automatically reboot.
If necessary, enter the password. The Voice
Gateway will request confirmation; enter 1 to
confirm. You will hear, "Option successful."
Hang up the phone. The Voice Gateway will
reboot, and all settings will be reset to their
factory default settings.
NOTE: This feature may be
protected by a password
available only from your ITSP.
If you need to enter a password,
refer to the following section,
"Entering a Password."
Chapter 5: Using the Interactive Voice Response Menu
Using the Interactive Voice Response Menu