Advertisement
Quick Links
Philips Consumer Lifestyle
Service Manual
PRODUCT INFORMATION
• This product meets the requirements regarding
interference suppression on radio and TV.
• After the product has been repaired, it should function
properly and has to meet the safety requirements as
officially laid down at this moment.
TECHNICAL INFORMATION
• Voltage
• Frequency
• Power consumption
• Standby power
• Color setting
• Weight
• Dimensions H x W x D
- Appliance
- F-Box
• Length of cord
• Contents water reservoir : 930 cc (ml)
Published by Philips Consumer Lifestyle
13/01
: 220 - 240 V
: 50 Hz
: 1450 W
: 0.25 W
: Lime Yellow
: 2,05 Kg
: 31,5 x 24,9 x 30,8 cm
: 36 x 29 x 29,5 cm
: 80 cm
Printed in the Netherlands
ACCESSORIES
• CRP475/01 1-cup pod holder Black
• HD5015/01 2-cup pod holder Black
• CRP855/01 Drip tray Lime yellow
• CRP862/01 Drip tray cover Black
• CRP874/01 Spout Star white
• CRP872/01 Collector
• CRP864/01 Water container small
• CRP867/01 Water container lid Star white
OPTIONAL (accessories)
• CRP865/01 Water container big (incl. bucket, optional
Britta Filter to be purchased separately)
• CRP866/01 Water container lid
(for Water container big)
© Copyright reserved
Senseo Twist
HD7870/10
HD7870/11
HD7870/12
HD7870/17
Subject to modification
Advertisement
Related Manuals for Philips Senseo Twist HD7870/10
Summary of Contents for Philips Senseo Twist HD7870/10
- Page 1 - F-Box : 36 x 29 x 29,5 cm • Length of cord : 80 cm • Contents water reservoir : 930 cc (ml) Published by Philips Consumer Lifestyle Printed in the Netherlands © Copyright reserved Subject to modification 13/01...
- Page 2 HD7870/10 /11 /12 /17 SCHEMATICS UI PCBA Water level On/Off button sensor 1-cup button 2-cup button Toggle button Communi cation On/Off LED Water 1-cup LED Supply Boiler 2-cup LED System Toggle LED PCBA Fuse Regular LED Strong LED Pump M Memory LED Descale LED Fuse...
- Page 3 HD7870/10 /11 /12 /17 DISASSEMBLY- AND RE-ASSEMBLY ADVISE To remove the brewhead assembly: • Remove the back cover. • Now use the screwdriver to trace around the edge of the tray panel assembly and base plate until you reach • Remove the boiler, or simply lay it aside. the position of the drip tray.
- Page 4 HD7870/10 /11 /12 /17 REPAIR INSTRUCTION Please note, as the appliance is equipped with a capacitive touch panel as a user interface, special 2-cup button attention is required to be able to enter several service modes. The capacitive buttons need 0,5 seconds to initialize after the mains is connected.
- Page 5 HD7870/10 /11 /12 /17 REPAIR INSTRUCTION BOILER RESET: Boiler-reset-step 0 Entry to boiler reset mode: ME/HE selection 1. Connect mains; In this appliance ME (Mid-End) should be selected; 2. After 0.5 second and before 1.5 second operate the Strong LED off. 1-cup button.
- Page 6 HD7870/10 /11 /12 /17 REPAIR INSTRUCTION SENSOR AND LED TEST Volume adjustment The PCB circuit board makes it possible to adjust the To validate the assembly and electrical correctness of an volume output by means of pushing the one-cup and two- appliance, especially during testing and debugging phase, cup user controls.
- Page 7 HD7870/10 /11 /12 /17 PARTS LIST Service code Description Remark 4222 259 44211 Pad support 1-cup Deep black 4222 259 44221 Pad support 2-cup Deep black 4222 247 67501 Collector Deep black 4222 259 52962 Spout assy complete Star white 4222 247 67751 Driptray cover Deep black...
- Page 8 HD7870/10 /11 /12 /17 EXPLODED VIEW 8-11...
- Page 9 HD7870/10 /11 /12 /17 EXPLODED VIEW 9-11...
- Page 10 HD7870/10 /11 /12 /17 EXPLODED VIEW 10-11...
- Page 11 HD7870/10 /11 /12 /17 EXPLODED VIEW 11-11...