Troubleshooting; Technical Specifications; Electrical Wiring - Buffalo CK915 Instruction Manual

UK
Trouble Shooting
Fault
Indicator Light does not
come on & Merchandiser
does not heat up
Indicator Light comes on but
Warmer does not heat up

Technical Specifications

Voltage
Code
(Volts)
CK915 220V-240V/50Hz
CK916 220V-240V/50Hz

Electrical Wiring

This appliance is supplied with a 3 pin, moulded, BS1363 plug and lead, with a 13 amp fuse.
The plug is to be connected to a suitable mains socket
The appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
• Neutral wire (coloured blue) to terminal marked N
• Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit
If in doubt, consult a qualified electrician. Electrical isolation points must be kept clear of any
obstructions. In the event of any emergency disconnection being required they must be readily
accessible
Probable Cause
Power is not switched at socket
Plug fuse has failed
Power cable is damaged
Thermostat has failed
Heating element has failed
Thermostat has failed
Power Current
(Watts) (Amps)
800w 3.4
800w 3.4
Turn power on at socket
Change fuse
Call BUFFALO dealer for repair
service
Call BUFFALO dealer for repair
service
Call BUFFALO dealer for repair
service
Call BUFFALO dealer for repair
service
Dimensions
(mm)
311 x 554 x 376mm
376 x 554 x 376mm
Action Required
Weight
(Kgs)
12.4
14.4