K Tool International KTI-81798S Owner's Manual

KTI-81798S
#5 SPLINE DRIVE IMPACT WRENCH WITH 6" EXTENDED ANVIL
OWNERS MANUAL
WARNING
• ALWAYS READ INSTRUCTIONS BEFORE USING POWER TOOLS
• ALWAYS WEAR APPROVED SAFETY GOGGLES AND HEARING PROTECTION
• AVOID PROLONGED EXPOSURE TO VIBRATION
WARNING
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth
defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks, cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
The risk of exposure to these types of chemicals varies depending on how
frequently you work with certain chemicals. To reduce your exposure to these
chemicals, work in a well-ventilated area and work with approved safety
equipment, such as dust masks that are specifically designed to filter out
microscopic particles.
KTI-81798S
SPECIFICATIONS
Drive Size ............................................................#5 Spline
Max. Torque .............................. 1,600 Ft.-Lbs. (2,169 Nm)
Working Torque ........... 100-1,200 Ft.-Lbs. (136-1627 Nm)
Free Speed .......................................................4,000 RPM
Avg. Air. Cons. ...................................... 10 cfm (283 l/min)
Air Inlet ............................................................... 1/2" NPT
Min. Hose Size ..................................... 1/2" I.D. (12.7mm)
Length .....................................................22.5" (571.5mm)
Weight.................................................. 26.2 Lbs. (11.9 kg)
12/11/17